AASHTO Standards
You can buy many AASHTO publications
at Amazon.Com by
clicking here.
AASHTO AMRL - AASHTO Materials Reference Laboratory (AMRL)
AASHTO C-GSBTW - Guide Design Specifications for Bridge Temporary Works
AASHTO C-HSLTS (2000) - Structural Supports for Highway Signs, Luminaires, and
Traffic Signals
AASHTO C-TF-25 - Guide Specifications for Geotextiles in Separation Applications
AASHTO HBI-16-COM (2000a) - Highway Bridges and all Current Interim
Specifications
AASHTO M105-85 - Gray Iron Castings
AASHTO M111-80-1986 - Zinc, Hot-Galvanized Coatings on Products Fabricated from
Rolled Pressed and Forged Steel Shapes, Plates, Bars and Strip
AASHTO M120 - Galvanizing
AASHTO M182 - Burlap Cloth made from Jute or Kenaf
AASHTO M194 - Water Reducing and Retarding Admixtures
AASHTO M247 - Thermoplastic Pavement Markings
AASHTO M251 - Bridge Bearings
AASHTO M252M-96 - Corrugated Polyethylene Drainage Pipe
AASHTO M288-99 - Geotextile Specification for Highway Applications
AASHTO M294M-98 - Corrugated Polyethylene Pipe, 300- to 1200-mm (12- to 48-in)
Diameter
AASHTO M306-89 - Grates
AASHTO M307 - Fumed Silica
AASHTO M320-02 - Performance Graded Asphalt Binder
AASHTO MP1 - Performance Graded Asphalt Binders
AASHTO MP2 - Superpave Volumetric Mix Design
AASHTO MP7-97 - Corrugated Polyethylene Pipe, 1350 and 1500 mm (54- and 60-in)
Diameter
AASHTO MP8-00 - Designing Stone Matrix Asphalt (SMA)
AASHTO PP1 - Practice for Accelerated Aging of Asphalt Binder Using Pressurized
Aging Vessel (PAV)
AASHTO PP19 - Volumetric Analysis of Compacted Hot Mix Asphalt (HMA)
AASHTO PP2 - Short and Long Term Aging of Hot Mix Asphalt
AASHTO PP28 - Superpave Volumetric Design for Hot-Mix, Asphalt (HMA)
AASHTO PP41-00 - Designing Stone Matrix Asphalt (SMA)
AASHTO PP6 - Practice for Grading or Verifying the Performance Grade of an
Asphalt Binder
AASHTO R29-02 - Grading or Verifying the Performance Grade of an Asphalt Binder
AASHTO RDG - Roadside Design Guide
AASHTO T132-87 - Adhesion to Concrete
AASHTO T166 - Bulk Specific Gravity of Compacted Bituminous Mixtures Using
Saturated Surface-Dry Specimens
AASHTO T19 - Unit Weight and Voids in Aggregate Mineral Filler for Bituminous
Paving Mixtures
AASHTO T240 - Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin
Film Oven Test)
AASHTO T277-89 - Rapid Determination of the Chloride Permeability of Concrete
AASHTO T283 - Resistance of Compacted Bituminous Mixture to Moisture Induced
Damage
AASHTO T305 - Determination of Draindown Characteristics in Uncompacted Asphalt
Mixtures
AASHTO T314-02 - Determining the Fracture Properties of Asphalt Binder in Direct
Tension
AASHTO T40-02 - Method of Sampling Bituminous Materials
AASHTO T88 - Particle Size Analysis of Soils
AASHTO T90 - Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T99 - The Moisture-Density Relations of Soils Using a 2.5 kg (5.5 lb)
Rammer and a 305 mm (12 in) Drop.
AASHTO TP1 - Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam
AASHTO TP4 - Preparing and Determining the Density of Hot-Mix Asphalt (HMA)
Specimens by Means of the Superpave Gyratory Compactor
AASHTO TP5 - Rheological Properties of Asphalt Binder Using Dynamic Shear
Rheometer (DSR)
AASHTO TP60 - Coefficient of Thermal Expansion
