ASTM Standards

You can buy many ASTM publications
at Amazon.Com by clicking here.

ASTM A1011/A1011M-02 (Replaces A569/A569M, A570/A570M) - Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A116-00 - Metallic-Coated, Steel Woven Wire Fence Fabric
ASTM A123/A123M-01a - Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM A126-95(2001) - Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A153/A153M-01a - Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM A165 (Discontinued 1988, Replaced By B766) - Electrodeposited Coatings of Cadmium on Steel
ASTM A167-99 - Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
ASTM A183-98 - Carbon Steel Track Bolts and Nuts
ASTM A185-01 - Steel Welded Wire Fabric, Plain, for Concrete Reinforcement
ASTM A193/A193M-01b - Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ASTM A194/A194M-00b - Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
ASTM A216/A216M-93(1998) - Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
ASTM A240/A240M-02 - Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A242/A242M-01 - High-Strength Low-Alloy Structural Steel
ASTM A252-98e1 - Welded and Seamless Steel Pipe Piles
ASTM A276-02 - Stainless Steel Bars and Shapes
ASTM A307-00 - Carbon Steel Bolts and Studs, 60,000 psi Tensile Strength
ASTM A313/A313M-98 - Stainless Steel Spring Wire
ASTM A314-97(2002) - Stainless Steel Billets and Bars for Forging
ASTM A325M-00 - Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM A328/A328M-00 - Steel Sheet Piling
ASTM A351/A351M-00 - Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
ASTM A36/A36M-01 - Carbon Structural Steel
ASTM A370-02e1 - Mechanical Testing of Steel Products
ASTM A421/A421M-98a - Uncoated Stress-Relieved Steel Wire for Pre-stressed Concrete
ASTM A426-92(2002) - Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
ASTM A446/A446M (Discontinued 1994, Replaced By A653/A653M) - Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality
ASTM A449-00 - Quenched and Tempered Steel Bolts and Studs
ASTM A47/A47M-99 - Ferritic Malleable Iron Castings
ASTM A48/A48M-00 - Gray Iron Castings
ASTM A480/A480M-02 - General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A484/A484M-00 - General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM A490-00 - Standard Specification for Heat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength
ASTM A490M-00 - High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
ASTM A497-01 - Steel Welded Wire Reinforcement, Deformed, for Concrete
ASTM A518/A518M-99 - Corrosion-Resistant High-Silicon Iron Castings
ASTM A518M (Discontinued 1999, Replaced By A518) - Corrosion-Resistant High-Silicon Iron Castings [Metric]
ASTM A526/A526M (Discontinued 1994 , No Replacement) - Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
ASTM A53/A53M-01 - Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A536-84(1999)e1 - Ductile Iron Castings
ASTM A563M-01 - Carbon and Alloy Steel Nuts
ASTM A564/A564M-02 - Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
ASTM A569/A569M (Discontinued 2000, Replaced By A1011/A1011M) - Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
ASTM A570/A570M (Discontinued 2000, Replaced By A1011/A1011M) - Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality (Discontinued 2000) ,
ASTM A574M-00 - Alloy Steel Socket-Head Cap Screws [Metric]
ASTM A576-90b(2000) - Steel Bars, Carbon, Hot-Wrought, Special Quality
ASTM A588/A588M-01 - High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100 mm] Thick
ASTM A615/A615M-01b - Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
ASTM A641/A641M-98 - Zinc-Coated (Galvanized) Carbon Steel Wire
ASTM A648-95(2000) - Steel Wire, Hard Drawn for Pre-stressing Concrete Pipe
ASTM A653/A653M-02 - Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A663/A663M-89(2000) - Steel Bars, Carbon, Merchant Quality, Mechanical Properties
ASTM A666-00 - Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM A702-89(2000) - Steel Fence Posts and Assemblies, Hot Wrought
ASTM A706/A706M-01 - Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
ASTM A709/A709M-01be3 - Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
ASTM A722/A722M-98 - Uncoated High-Strength Steel Bar for Pre-stressing Concrete
ASTM A741-98 - Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
ASTM A742/A742M-98 - Steel Sheet, Metallic Coated and Polymer Pre-coated for Corrugated Steel Pipe
ASTM A751-01 - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM A760/A760M-01a - Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
ASTM A764-95(2001) - Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A775/A775M-01 - Epoxy-Coated Reinforcing Steel Bars
ASTM A780-01 - Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A792/A792M-02 - Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A82-01 - Steel Wire, Plain, for Concrete Reinforcement
ASTM A820-01 - Steel Fibers for Fiber-Reinforced Concrete
ASTM A821/A821M-99 - Steel Wire, Hard Drawn for Pre-stressing Concrete Tanks
ASTM A881/A881M-99 - Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Pre-stressed Concrete Railroad Ties
ASTM A884/A884M-01 - Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
ASTM A90/A90M-01 - Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A929/A929M-01 - Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
ASTM A955/A955M-01 - Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
ASTM A975-97 - Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM B108-01a - Aluminum-Alloy Permanent Mold Castings
ASTM B117-97 - Operating Salt Spray (Fog) Apparatus
ASTM B137-95(2000) - Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B138/B138M-01 - Manganese Bronze Rod, Bar, and Shapes
ASTM B148-97e1 - Aluminum-Bronze Sand Castings
ASTM B16/B16M-00 - Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
ASTM B209-02 - Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
ASTM B221M-00 - Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
ASTM B26/B26M-01 - Aluminum-Alloy Sand Castings
ASTM B265-99e1 - Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B3-01 - Soft or Annealed Copper Wire
ASTM B30-00e2 - Copper Alloys in Ingot Form
ASTM B316/B316M-00 - Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B36/B36M-01 - Brass Plate, Sheet, Strip, and Rolled Bar
ASTM B418-01 - Cast and Wrought Galvanic Zinc Anodes
ASTM B487-85(2002) - Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross-Section
ASTM B584-00 - Copper Alloy Sand Castings for General Applications
ASTM B62-93 (Discontinued 2002, No Replacement) - Composition Bronze or Ounce Metal Castings
ASTM B633-98e1 - Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B669 (Discontinued 1999, No Replacement) - Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM B766-86(1998) - Electrodeposited Coatings of Cadmium
ASTM B843-93(1998) - Magnesium Alloy Anodes for Cathodic Protection
ASTM B88M-99 - Seamless Copper Water Tube
ASTM C1017/C1017M-98 - Chemical Admixtures for Use in Producing Flowing Concrete
ASTM C1042-99 - Bond Strength of Latex Systems Used With Concrete By Slant Shear
ASTM C1064/C1064M-01 - Temperature of Freshly Mixed Portland Cement Concrete
ASTM C1089-97 - Spun Cast Pre-stressed Concrete Poles
ASTM C109/C109M-02 - Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C1091-99 - Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM C1116-02 - Fiber-Reinforced Concrete and Shotcrete
ASTM C117-95 - Materials Finer than 75-[mu]m (No. 200) Sieve in Mineral Aggregates by Washing
ASTM C1183-91(1997) - Extrusion Rate of Elastomeric Sealants
ASTM C12-02 - Installing Vitrified Clay Pipe Lines
ASTM C1202-97 - Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
ASTM C1208/C1208M-02 - Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
ASTM C1240-01 - Use of Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar, and Grout
ASTM C125-00ae1 - Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C1260-01 - Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM C1262-98e1 - Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units
ASTM C127-01 - Specific Gravity and Absorption of Coarse Aggregate
ASTM C128-01 - Specific Gravity and Absorption of Fine Aggregate
ASTM C1292-00 - Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C136-01 - Sieve Analysis of Fine and Coarse Aggregates
ASTM C1372-01a - Segmental Retaining Wall Units
ASTM C138/C138M-01a - Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C140-02a - Sampling and Testing Concrete Masonry Units and Related Units
ASTM C143/C143M-00 - Slump of Hydraulic Cement Concrete
ASTM C1433M-02a - Pre-cast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
ASTM C150-02 - Portland Cement
ASTM C156-98 - Water Retention by Concrete Curing Materials
ASTM C157/C157M-99 - Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
ASTM C171-97a - Sheet Materials for Curing Concrete
ASTM C172-99 - Sampling Freshly Mixed Concrete
ASTM C173/C173M-01e1 - Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C174/C174M-97 - Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
ASTM C177-97 - Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C190 (Discontinued 1990, No Replacement) - Tensile Strength of Hydraulic Cement Mortars
ASTM C203-99 - Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C227-97a - Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
ASTM C231-97e1 - Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C260-01 - Air-Entraining Admixtures for Concrete
ASTM C273-00e1 - Shear Properties of Sandwich Core Materials
ASTM C29/C29M-97 - Bulk Density ("Unit Weight") and Voids in Aggregate
ASTM C296-00 - Asbestos-Cement Pressure Pipe
ASTM C301-98 - Vitrified Clay Pipe
ASTM C307-99 - Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C309-98a - Liquid Membrane-Forming Compounds for Curing Concrete
ASTM C31/C31M-00e1 - Making and Curing Concrete Test Specimens in the Field
ASTM C311-00e1 - Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
ASTM C315-02 - Clay Flue Linings
ASTM C33-02a - Concrete Aggregates
ASTM C330-00 - Lightweight Aggregates for Structural Concrete
ASTM C348-02 - Flexural Strength of Hydraulic-Cement Mortars
ASTM C361M-99 - Reinforced Concrete Low-Head Pressure Pipe
ASTM C39/C39M-01 - Compressive Strength of Cylindrical Concrete Specimens
ASTM C403/C403M-99 - Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C42/C42M-99 - Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C423-02 - Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM C425-02 - Compression Joints for Vitrified Clay Pipe and Fittings
ASTM C428-97(2002) - Asbestos-Cement Non-pressure Sewer Pipe
ASTM C443M-02 - Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets [Metric]
ASTM C457-98 - Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
ASTM C469-94e1 - Static Modulus of Elasticity and Poisons's Ratio of Concrete in Compression
ASTM C473-00 - Physical Testing of Gypsum Panel Products
ASTM C478M-97 - Pre-cast Reinforced Concrete Manhole Sections
ASTM C494/C494M-99ae1 - Chemical Admixtures for Concrete
ASTM C496-96 - Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM C507M-02 - Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
ASTM C518-98 - Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C531-00 - Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C566-97 - Total Evaporable Moisture Content of Aggregate by Drying
ASTM C567-00 - Density Structural Lightweight Concrete
ASTM C570 (Discontinued 2002, No_replacement) - Oil- and Resin-Base Caulking Compound for Building Construction
ASTM C578-01 - Rigid, Cellular Polystyrene Thermal Insulation
ASTM C579-01 - Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
ASTM C580-98 - Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C595-02a - Blended Hydraulic Cements
ASTM C596-01 - Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM C603-90(1997)e1 - Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C618-01 - Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in
ASTM C639-01 - Rheological (Flow) Properties of Elastomeric Sealants
ASTM C642-97 - Density, Absorption, and Voids in Hardened Concrete
ASTM C661-98 - Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C666-97 - Resistance of Concrete to Rapid Freezing and Thawing
ASTM C67-02a - Sampling and Testing Brick and Structural Clay Tile
ASTM C672/C672M-98 - Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
ASTM C679-87(1997)e1 - Tack-Free Time of Elastomeric Sealants
ASTM C684-99 - Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
ASTM C700-02 - Vitrified Clay Pipe , Extra Strength, Standard Strength, and Perforated
ASTM C702-98 - Reducing Samples of Aggregate to Testing Size
ASTM C719-93(1998) - Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement
ASTM C78-02 - Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C789M (Discontinued 2000, Replaced By C1433M) - Pre-cast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
ASTM C793-02 - Effects of Accelerated Weathering on Elastomeric Joint Sealants
ASTM C794-01 - Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C828-01 - Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C836-00 - High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
ASTM C850M (Discontinued 2000, Replaced By C1433M) - Pre-cast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings
ASTM C87-83(1995)e1 - Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ASTM C877-02 - External Sealing Bands for Concrete Pipe, Manholes, and Pre-cast Box Sections
ASTM C881/C881M-02 - Epoxy-Resin-Base Bonding Systems for Concrete
ASTM C882-99 - Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C896-02 - Standard Terminology Relating to Clay Products
ASTM C920-02 - Elastomeric Joint Sealants
ASTM C923M-98 - Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals [Metric]
ASTM C94/C94M-00e2 - Ready-Mixed Concrete
ASTM C944-99 - Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
ASTM C979-99 - Pigments for Integrally Colored Concrete
ASTM C989-99 - Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
ASTM C990-01a - Joints for Concrete Pipe, Manholes, and Pre-cast Box Sections Using Preformed Flexible Joint Sealants
ASTM D1000-99 - Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D1003-00 - Haze and Luminous Transmittance of Transparent Plastics
ASTM D1056-00 - Flexible Cellular Materials-Sponge or Expanded Rubber
ASTM D1084-97 - Viscosity of Adhesives
ASTM D1125-95(1999) - Electrical Conductivity and Resistivity of Water
ASTM D113-99 - Ductility of Bituminous Materials
ASTM D1140-00 - Amount of Material in Soils Finer Than the No. 200 (75-[mu]m) Sieve
ASTM D1149-99 - Rubber Deterioration-Surface Ozone Cracking in a Chamber
ASTM D1155-89(1994)e1 - Roundness of Glass Spheres
ASTM D1160-02a - Distillation of Petroleum Products at Reduced Pressure
ASTM D1190-97 (Discontinued 2002, No_replacement) - Concrete Joint Sealer, Hot-Applied Elastic Type
ASTM D1191 (Discontinued 1996, Replaced By D5329) - Concrete Joint Sealers
ASTM D1210-96 - Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D1214-89(1994)e1 - Sieve Analysis of Glass Spheres
ASTM D123-00b - Standard Terminology Relating to Textiles
ASTM D1238-01e1 - Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1248-02 - Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1293-99 - pH of Water
ASTM D1298-99 - Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1310-01 - Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D140-01 - Sampling Bituminous Materials
ASTM D1415-88(1999) - Rubber Property-International Hardness
ASTM D1429-95(1999) - Specific Gravity of Water and Brine
ASTM D1457 (Discontinued 1997, Replaced by D4894 and D4895) - Polytetrafluorethylene (PTFE) Molding and Extrusion Materials
ASTM D146-97 - Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM D1475-98 - Density of Liquid Coatings, Inks, and Related Products
ASTM D149-97a - Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating
ASTM D150-98 - AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
ASTM D1500-98 - ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D1505-98e1 - Density of Plastics by the Density-Gradient Technique
ASTM D1525-00 - Vicat Softening Temperature of Plastics
ASTM D1531-01 - Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
ASTM D1557-00 - Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000ft-lbf/ft3 (2,700 kN-m/m3))
ASTM D1598-97 - Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1599-99 - Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D1603-01 - Carbon Black In Olefin Plastics
ASTM D1621-00 - Compressive Properties Of Rigid Cellular Plastics
ASTM D1622-98 - Apparent Density of Rigid Cellular Plastics
ASTM D1644-01 - Nonvolatile Content of Varnishes
ASTM D1652-97 - Epoxy Content of Epoxy Resins
ASTM D1693-01 - Environmental Stress-Cracking of Ethylene Plastics
ASTM D1709-01 - Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1729-96 - Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D1751-99 - Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Non-extruding and Resilient Bituminous Types)
ASTM D1752-84(1996)e1 - Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM D1754-97(2002) - Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
ASTM D1763-00 - Epoxy Resins
ASTM D1777-96 - Thickness of Textile Materials
ASTM D1784-99ae1 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D1790-02 - Brittleness Temperature of Plastic Sheeting by Impact
ASTM D1822-99 - Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D185-84(1999) - Coarse Particles in Pigments, Pastes, and Paints
ASTM D1850 (Discontinued 1991, No Replacement) - Concrete Joint Sealer, Cold Application Type
ASTM D1869-95(2000) - Rubber Rings for Asbestos-Cement Pipe
ASTM D1925 (Discontinued 1995, No Replacement) - Yellowness Index of Plastics
ASTM D1929-96(2001)e1 - Determining Ignition Temperature of Plastics
ASTM D2000-01 - Rubber Products in Automotive Applications
ASTM D2006 (Discontinued 1975, No Replacement) - Characteristic Groups in Rubber Extender and Processing Oils by the Precipitation Method
ASTM D2007-01a - Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D2074-92(1998) - Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
ASTM D2122-98 - Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D2126-99 - Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2152-95 - Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
ASTM D2170-01a - Kinematic Viscosity of Asphalts (Bitumens)
ASTM D2205-85(1998) - Selection of Tests for Traffic Paints
ASTM D2237 (Discontinued 1988 , No Replacement) - Rate-of-Rise (Volume Increase) Properties of Urethane Foaming Systems
ASTM D2239-01 - Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
ASTM D2240-02 - Rubber Property-Durometer Hardness
ASTM D2241-00 - Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2243-95 - Freeze-Thaw Resistance of Water-Borne Coatings
ASTM D2244-02 - Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2256-02 - Tensile Properties of Yarns by the Single-Strand Method
ASTM D2321-00 - Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2344/D2344M-00e1 - Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D2369-01e1 - Volatile Content of Coatings
ASTM D2371-85(1999) - Pigment Content of Solvent-Reducible Paints
ASTM D2398 (Discontinued 1984, Replaced By D36) - Softening Point of Bitumen in Ethylene Glycol (Ring-and-Ball)
ASTM D2412-02 - Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D2415-98 - Ash in Coal Tar and Pitch
ASTM D2419-95 - Sand Equivalent Value of Soils and Fine Aggregates
ASTM D243-97 - Residue of Specified Penetration
ASTM D2434-68(2000) - Permeability of Granular Soils (Constant Head)
ASTM D244-00 - Emulsified Asphalts (Viscosity, Sieve Test, Particle Charge Test, Cement Mixing Test, 5-day Settlement Test, Residue)
ASTM D2444-99 - Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a
ASTM D2455-89(1996)e1 - Identification of Carboxylic Acids in Alkyd Resins
ASTM D2457-97 - Specular Gloss of Plastic Films and Solid Plastics
ASTM D2487-00 - Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D2513-01a - Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D256-02 - Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D2563-94(2002)e1 - Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
ASTM D257-99 - DC Resistance or Conductance of Insulating Materials
ASTM D2621-87(2000) - Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D2628-91(1998) - Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D2657-97 - Heat Fusion Joining of Polyolefin Pipe and Fittings
ASTM D2680-01 - Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D276-00a - Identification of Fibers in Textiles
ASTM D2834-95(2001) - Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion
ASTM D2837-01ae1 - Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ASTM D2842-01 - Water Absorption of Rigid Cellular Plastics
ASTM D2843-99 - Density of Smoke from the Burning or Decomposition of Plastics
ASTM D285 (Discontinued 1985 , No Replacement) - Distillation of Crude Petroleum
ASTM D2863-00 - Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D2872-97 - Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D292 (Discontinued 1985 , No Replacement) - Cubic Foot Weight of Coke
ASTM D2922-01 - Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
ASTM D2939-98 - Emulsified Bitumens Used as Protective Coatings
ASTM D3017-01 - Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
ASTM D3034-00 - Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D3035-01 - Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D3039/D3039M-00 - Tensile Properties of Polymer Matrix Composite Materials
ASTM D3080-98 - Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM D3139-98 - Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM D3143-98 - Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D3168-85(1999) - Qualitative Identification of Polymers in Emulsion Paints
ASTM D3202-94(2000) - Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
ASTM D3212-96a - Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3218-01 - Polyolefin Monofilaments
ASTM D3271-87(2001) - Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
ASTM D3350-02a - Polyethylene Plastics Pipe and Fittings Materials
ASTM D3405-97 (Discontinued 2002, No Replacement) - Joint Sealants, Hot-Applied, for Concrete and Asphalt Pavements
ASTM D3407 (Discontinued 1996, Replaced By D5329) - Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements
ASTM D3575-00e1 - Flexible Cellular Materials Made From Olefin Polymers (Property tests - density, compressive strength, compression set, tensile strength, elongation at break, tear strength)
ASTM D36-95(2000)e1 - Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D3665-99 - Random Sampling of Construction Materials
ASTM D3723-84(1999) - Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D3773-90(1996)e1 - Length of Woven Fabric
ASTM D3775-98 - Fabric Count of Woven Fabric
ASTM D3776-96 - Mass Per Unit Area (Weight) of Fabric
ASTM D3786-01 - Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
ASTM D3910-98 - Design, Testing, and Construction of Slurry Seal
ASTM D3916-02 - Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D3931-93a(1999)e1 - Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D395-01 - Rubber Property-Compression Set
ASTM D3960-02 - Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3963/D3963M-01 - Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
ASTM D4014-89(1995) - Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM D402-97 - Distillation of Cut-Back Asphaltic (Bituminous) Products
ASTM D4060-01 - Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D4061-94(2000) - Retro-reflectance of Horizontal Coatings
ASTM D4097-01 - Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D4101-02b - Polypropylene Injection and Extrusion Materials
ASTM D412-98a - Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension
ASTM D413-98 - Rubber Property - Adhesion to Flexible Substrate
ASTM D4142-89(2001) - Testing Epoxy Resins
ASTM D4182-97 - Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal
ASTM D4214-98 - Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D422-63(1998) - Particle-Size Analysis of Soils
ASTM D4285-83(1999) - Indicating Oil or Water in Compressed Air
ASTM D429-02 - Rubber Property-Adhesion to Rigid Substrates
ASTM D4318-00 - Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4354-99 - Sampling of Geosynthetics for Testing
ASTM D4355-02 - Deterioration of Geotextiles from Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D4400-99 - Sag Resistance of Paints Using a Multinotch Applicator
ASTM D4402-02 - Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
ASTM D4417-93(1999) - Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D445-01 - Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D4451-02 - Pigment Content of Paints by Low-Temperature Ashing
ASTM D4491-99a - Water Permeability of Geotextiles by Permittivity
ASTM D4505-01a - Preformed Plastic Pavement Marking Tape for Extended Service Life
ASTM D4533-91(1996) - Trapezoid Tearing Strength of Geotextiles
ASTM D4541-02 - Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4587-01 - Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4592-01a - Preformed Plastic Pavement Marking Tape for Limited Service Life
ASTM D4595-86(2001) - Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4632-91(1996) - Grab Breaking Load and Elongation of Geotextiles
ASTM D4707-97 - Measuring Paint Spatter Resistance to Roller Application
ASTM D471-98e1 - Rubber Property-Effect of Liquids
ASTM D4751-99a - Determining Apparent Opening Size of a Geotextile
ASTM D4833-00e1 - Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
ASTM D4867/D4867M-96 - Effect of Moisture on Asphalt Concrete Paving Mixtures
ASTM D4873-97 - Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls
ASTM D4894-98a (Replaces D1457) - Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D4895-98 (Replaces D1457) - Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D4940-98 - Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
ASTM D4956-01a - Retroreflective Sheeting for Traffic Control
ASTM D5-97 - Penetration of Bituminous Materials
ASTM D5033-00 - The Development of Standards Relating to the Proper Use of Recycled Plastics
ASTM D5035-95 - Breaking Force and Elongation of Textile Fabrics (Strip Method)
ASTM D5084-00e1 - Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5095-91(2002) - Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
ASTM D518-99 - Rubber Deterioration-Surface Cracking
ASTM D5199-99 (Withdrawn 2002, No Replacement) - Measuring Nominal Thickness of Geotextiles and Geomembranes
ASTM D523-89(1999) - Specular Gloss
ASTM D5261-92(1996) - Measuring Mass per Unit Area of Geotextiles
ASTM D5262-97 - Evaluating the Unconfined Tension Creep Behavior of Geosynthetics
ASTM D5321-02 - Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
ASTM D5329-96 - Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
ASTM D5397-99 - Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D541-87 (Discontinued 1996 , No Replacement) - Single Jute Yarn
ASTM D542-00 - Index of Refraction of Transparent Organic Plastics
ASTM D543-95(2001) - Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D562-01 - Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer Viscometer
ASTM D570-98 - Water Absorption of Plastics
ASTM D573-99 - Rubber-Deterioration in an Air Oven
ASTM D575-91(2001) - Rubber Properties in Compression
ASTM D5818-95(2000) - Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage
ASTM D5894-96 - Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D609-00 - Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D610-01 - Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D611-01b - Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
ASTM D618-00 - Conditioning Plastics for Testing
ASTM D621-64(1988) (Discontinued 1994 , No Replacement) - Test Methods for Deformation of Plastics Under Load
ASTM D624-00e1 - Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D635-98 - Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D638-02 - Tensile Properties of Plastics
ASTM D6386-99 - Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D648-01 - Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D660-93(2000) - Evaluating Degree of Checking of Exterior Paints
ASTM D661-93(2000) - Evaluating Degree of Cracking of Exterior Paints
ASTM D6637-01 - Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM D668-99 - Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
ASTM D6706-01 - Measuring Geosynthetic Pullout Resistance in Soil
ASTM D695-02a - Compressive Properties of Rigid Plastics
ASTM D696-98 - Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
ASTM D698-00a - Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
ASTM D70-97 - Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D711-89(1998) - No-Pick-Up Time of Traffic Paint
ASTM D713-90(1998) - Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM D714-02 - Evaluating Degree of Blistering of Paints
ASTM D746-98e1 - Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D75-97 - Sampling Aggregates
ASTM D772-86(2000) - Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D790-02 - Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792-98 - Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D822-01 - Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D868-85(1998) - Evaluating Degree of Bleeding of Traffic Paint
ASTM D869-85(1998) - Evaluating Degree of Settling of Paint
ASTM D882-02 - Tensile Properties of Thin Plastic Sheeting
ASTM D883-00 - Standard Terminology Relating to Plastics
ASTM D92-01 - Flash and Fire Points by Cleveland Open Cup
ASTM D962-81(1999) - Aluminum Powder and Paste Pigments for Paints
ASTM D969-85(1998) - Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D97-02 - Pour Point of Petroleum Products
ASTM D977-98 - Emulsified Asphalt
ASTM D98-98 - Calcium Chloride
ASTM E10-01 - Brinell Hardness of Metallic Materials
ASTM E108-00 - Fire Tests of Roof Coverings
ASTM E11-01 - Wire Cloth and Sieves for Testing
ASTM E1132-99a - Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM E1142-97 - Standard Terminology Relating to Thermophysical Properties
ASTM E119-00a - Fire Tests of Building Construction and Materials
ASTM E1247-92(2000) - Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM E1332-90(1998) - Determination of Outdoor-Indoor Transmission Class
ASTM E1347-97 (Replaces E97) - Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E1349-90(1998) - Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E1512-01 - Testing Bond Performance of Adhesive-Bonded Anchors
ASTM E155-00 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E1710-97 - Measurement of Retro-reflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retro-reflectometer
ASTM E178-02 - Dealing with Outlying Observations
ASTM E2176-01 - Measuring the Coefficient of Retro-reflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting
ASTM E2177-01 - Measuring the Coefficient of Retro-reflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E28-99 - Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM E284-99a - Standard Terminology of Appearance
ASTM E29-02 - Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E298-01 - Assay of Organic Peroxides
ASTM E303-93(1998) - Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E308-01 - Computing the Colors of Objects by Using the CIE System
ASTM E313-00 - Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM E413-87(1999) - Classification for Rating Sound Insulation
ASTM E449-96(2001) - Analysis of Calcium Chloride
ASTM E488-96 - Strength of Anchors in Concrete and Masonry Elements
ASTM E70-97 - pH of Aqueous Solutions With the Glass Electrode
ASTM E795-00 - Mounting Test Specimens During Sound Absorption Tests
ASTM E84-01 - Surface Burning Characteristics of Building Materials
ASTM E90-02 - Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E96-00e1 - Water Vapor Transmission of Materials
ASTM E97 (Discontinued 1991, Replaced By E1347) - Directional Reflectance Factor, 45-deg 0-deg, of Opaque Specimens by Broad-Band Filter Reflectometry
ASTM E991-98 - Color Measurement of Fluorescent Specimens
ASTM F1281-02e1 - Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F1282-02e1 - Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1292-99 - Impact Attenuation of Surface Systems Under and Around Playground Equipment
ASTM F1336-02 - Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F1476-01 - Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F1667-02 - Driven Fasteners: Nails, Spikes, and Staples
ASTM F1668-96(2002) - Standard Guide for Construction Procedures for Buried Plastic Pipe
ASTM F1674-96 - Joint restraint products for use with PVC pipe
ASTM F1759-97 - Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F1760-01 - Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM F1803-97 - Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM F405-97 - Corrugated Polyethylene (PE) Tubing and Fittings
ASTM F412-00 - Standard Terminology Relating to Plastic Piping Systems
ASTM F436M-93(2000) - Hardened Steel Washers [Metric]
ASTM F476-84(2002) - Security of Swinging Door Assemblies
ASTM F477-02 - Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F537-01 - Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F626-96a - Fence Fittings
ASTM F667-97 - Large Diameter Corrugated Polyethylene Pipe and Fittings
ASTM F668-99a - Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
ASTM F679-01 - Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F690-86(1994) - Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
ASTM F714-01 - Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
ASTM F738M-02 - Stainless Steel Metric Bolts, Screws, and Studs
ASTM F794-01 - Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F810-01 - Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption
ASTM F835-00 - Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F894-98a - Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F949-01a - Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings
ASTM G12-83(1998) - Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM G14-88(1996)e1 - Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G147-96 - Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM G152-00ae1 - Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-00ae1 - Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G155-00ae1 - Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G17-88(1998) - Penetration Resistance of Pipeline Coatings (Blunt Rod)
ASTM G20-88(1996)e1 - Chemical Resistance of Pipeline Coatings
ASTM G21-96(2002) - Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G23-96 (Discontinued 2000, Replaced By G152 & G153) - Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
ASTM G26-96 (Discontinued 2000, Replaced By G155) - Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
ASTM G34-01 - Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G8-96 - Cathodic Disbonding of Pipeline Coatings
ASTM International Manual Series - MNL 17 - Paint and Coating Testing Manual, Fourteenth Edition 1995 - Joseph V. Koleske - Editor
ASTM PS131-01 - Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

This entire web site is Copyright 1999 to 2007 by Mark Turner.
To send e-mail, click here.