AWWA Standards
You can buy many AWWA publications
at Amazon.Com by
clicking here.
AWWA A100-97 - Water Wells
AWWA B100-01 - Filtering Material
AWWA B101-01 - Precoat Filter Media
AWWA B200-98 - Sodium Chloride
AWWA B201-98 - Soda Ash
AWWA B202-02 - Quicklime and Hydrated Lime (Includes addendum B202a-97)
AWWA B300-99 - Hypochlorites
AWWA B301-99 - Liquid Chlorine
AWWA B302-00 - Ammonium Sulfate
AWWA B303-00 - Sodium Chlorite
AWWA B402-00 - Ferrous Sulfate
AWWA B403-98 - Aluminum Sulfate—Liquid, Ground, or Lump
AWWA B404-98 - Liquid Sodium Silicate
AWWA B405-00 - Sodium Aluminate
AWWA B406-97 - Ferric Sulfate
AWWA B407-98 - Liquid Ferric Chloride
AWWA B408-98 - Liquid Polyaluminum Chloride
AWWA B501-98 - Sodium Hydroxide (Caustic Soda)
AWWA B502-01 - Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) (Includes
addendum B502a-97)
AWWA B503-01 - Sodium Tripolyphosphate (Includes addendum B503a-97)
AWWA B504-01 - Monosodium Phosphate, Anhydrous (Includes addendum B504a-97)
AWWA B505-01 - Disodium Phosphate, Anhydrous (Includes addendum B505a-97)
AWWA B510-00 - Carbon Dioxide
AWWA B511-00 - Potassium Hydroxide (Includes addendum B511a-97)
AWWA B512-02 - Sulfur Dioxide
AWWA B550-00 - Calcium Chloride
AWWA B600-96 - Powdered Activated Carbon
AWWA B601-00 - Sodium Metabisulfite
AWWA B602-02 - Copper Sulfate (Includes addendum B602a-97)
AWWA B603-98 - Potassium Permanganate
AWWA B604-96 - Granular Activated Carbon
AWWA B605-99 - Reactivation of Granulated Activated Carbon
AWWA C104/A21.4-95 - Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for
Water
AWWA C105/A21.5-99 - Polyethylene Encasement for Ductile-Iron Pipe Systems
AWWA C110/A21.10-98 - Ductile-Iron and Gray-Iron Fittings, 3 in. Through 48 in.
(76 mm Through 1,219 mm), for Water
AWWA C111/A21.11-00 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and
Fittings
AWWA C115/A21.15-99 - Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron
Threaded Flanges
AWWA C116/A21.16-98 - Protective Fusion-Bonded Epoxy Coatings for the Interior
and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply
Service
AWWA C150/A21.50-02 - Thickness Design of Ductile-Iron Pipe
AWWA C151/A21.51-02 - Ductile-Iron Pipe, Centrifugally Cast, for Water
AWWA C153/A21.53-00 - Ductile-Iron Compact Fittings, 3 in. Through 24 in. (76 mm
Through 610 mm) and 54 In. Through 64 In. (1,400 mm Through 1,600 mm), for Water
Service
AWWA C200-97 - Steel Water Pipe—6 in. (150 mm) and Larger
AWWA C203-02 - Coal-Tar Protective Coatings and Linings for Steel Water
Pipelines—Enamel and Tape—Hot-Applied (Includes addendum C203a-99)
AWWA C205-00 - Cement-Mortar Protective Lining and Coating for Steel Water Pipe
- 4 in. (100 mm) and 54 in. Through 24 in. (1400 mm Through 1600 mm) for Water
Service
AWWA C206-97 - Field Welding of Steel Water Pipe
AWWA C207-01 - Steel Pipe Flanges for Waterworks Service—Sizes 4 in. Through 144
in. (100 mm Through 3,600 mm)
AWWA C208-01 - Dimensions for Fabricated Steel Water Pipe Fittings
AWWA C209-00 - Cold-Applied Tape Coatings for the Exterior of Special Sections,
Connections, and Fittings for Steel Water Pipe
AWWA C210-97 - Liquid-Epoxy Coating Systems for the Interior and Exterior of
Steel Water Pipelines
AWWA C213-01 - Fusion-Bonded Epoxy Coating for the Interior and Exterior
AWWA C214-00 - Tape Coating Systems for the Exterior of Steel Water Pipelines
AWWA C215-99 - Extruded Polyolefin Coatings for the Exterior of Steel Water
Pipelines
AWWA C216-00 - Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior
of Special Sections, Connections, and Fitting
AWWA C217-99 - Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coatings for
the Exterior of Special Sections, Connections, and Fittings for Buried Steel
Water Pipelines
AWWA C218-99 - Coating the Exterior of Above Ground Steel Water Pipelines and
Fitting
AWWA C219-01 - Bolted, Sleeve-Type Couplings for Plain-End Pipe
AWWA C220-98 - Stainless-Steel Pipe, 4 in. (100 mm) and Larger (Includes
addendum C220a-99)
AWWA C221-01 - Fabricated Steel Mechanical Slip-Type Expansion Joints
AWWA C222-99 - Polyurethane Coatings for the Interior and Exterior of Steel
Water Pipe and Fittings
AWWA C224-01 - Two-layer Nylon-11 Based Polyamide Coating System for Interior
and Exterior of Steel Water Pipe and Fittings
AWWA C300-97 - Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
AWWA C301-99 - Pre-stressed Concrete Pressure Pipe, Steel-Cylinder Type
AWWA C302-95 - Reinforced Concrete Pressure Pipe, Non-cylinder Type, for Water
and Other Liquids
AWWA C303-95 - Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
AWWA C304-99 - Design of Pre-stressed Concrete Cylinder Pipe
AWWA C400-93 (R98) - Asbestos–Cement Pressure Pipe, 4 in. Through 16 in. (100 mm
Through 400 mm) , for Water Distribution Systems
AWWA C401-93 (R98) - The Selection of Asbestos–Cement Pressure Pipe, 4 in.
Through 16 in. (100 mm Through 400 mm), for Water Distribution Systems
AWWA C402-00 - Asbestos–Cement Transmission Pipe, 18 in. Through 42 in. (450 mm
Through 1,050 mm), for Water Supply Service
AWWA C403-00 - The Selection of Asbestos–Cement Transmission Pipe, Sizes 18 in.
Through 42 in. (450 mm Through 1,050 mm),
AWWA C500-93 - Metal-Seated Gate Valves for Water Supply Service (Includes
addendum C500a-95)
AWWA C501-92 (Discontinued) - Cast-Iron Sluice Gates
AWWA C502-94 - Dry-Barrel Fire Hydrants
AWWA C503-97 - Wet-Barrel Fire Hydrants
AWWA C504-00 - Rubber-Seated Butterfly Valves
AWWA C507-99 - Ball Valves, 6 in. Through 48 in. (150 mm Through 1,200 mm)
AWWA C508-01 - Swing-Check Valves for Waterworks Service, 2 in. (50 mm) Through
24 in.( 600 mm) NPS
AWWA C509-01 - Resilient-Seated Gate Valves for Water Supply Service Includes
addendum C509a-95)
AWWA C510-97 - Double Check Valve Backflow Prevention Assembly
AWWA C511-97 - Reduced-Pressure Principle Backflow Prevention Assembly
AWWA C512-99 - Air Release, Air/Vacuum, and Combination Air Valves for
Waterworks Service
AWWA C513-97 - Open-Channel, Fabricated-Metal Slide Gates
AWWA C515-01 - Reduced-Wall, Resilient-Seated Gate Valves for Water Supply
Service
AWWA C540-93 - Power-Actuating Devices for Valves and Sluice Gates
AWWA C550-01 - Protective Epoxy Interior Coatings for Valves and Hydrants
AWWA C560-01 - Cast-Iron Slide Gates
AWWA C600-99 - Installation of Ductile-Iron Water Mains and Their Appurtenances
AWWA C602-00 - Cement-Mortar Lining of Water Pipelines in Place—4 in. (100 mm)
and Larger
AWWA C603-96 (R00) - Installation of Asbestos Cement Pressure Pipe
AWWA C605-02 - Underground Installation of Polyvinyl Chloride (PVC) Pressure
Pipe and Fittings for Water
AWWA C606-97 - Grooved and Shouldered Joints
AWWA C651-99 - Disinfecting Water Mains
AWWA C652-02 - Disinfection of Water-Storage Facilities
AWWA C653-97 - Disinfection of Water Treatment Plants
AWWA C654-97 - Disinfection of Wells
AWWA C700-95 - Cold-Water Meters—Displacement Type, Bronze Main Case
AWWA C701-02 - Cold-Water Meters—Turbine Type, for Customer Service
AWWA C702-01 - Cold-Water Meters—Compound Type
AWWA C703-96 - Cold-Water Meters—Fire Service Type
AWWA C704-92 - Propeller-Type Meters for Waterworks Applications
AWWA C706-96 - Direct-Reading, Remote-Registration Systems for Cold-Water Meters
AWWA C706-96(R01) - Direct-Reading, Remote-Registration Systems for Cold-Water
Meters
AWWA C707-02 - Encoder-Type Remote-Registration Systems for Cold-Water Meters
AWWA C708-96 - Cold-Water Meters—Multi-jet Type (Includes addendum C708a-98)
AWWA C710-95 - Cold-Water Meters—Displacement Type, Plastic Main Case
AWWA C800-01 - Underground Service Line Valves and Fittings (Also Included:
Collected Standards for Service Line Materials)
AWWA C900-97 - Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings,
4 in. Through 12 in. (100 mm Through 300 mm), for Water Distribution
AWWA C901-96 - Polyethylene (PE) Pressure Pipe and Tubing, ½ in. (13 mm) Through
3 in. (76 mm), for Water Service
AWWA C905-97 - Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings,
14 in. Through 48 in. (350 mm Through 1,200 mm), for Water Transmission and
Distribution
AWWA C906-99 - Polyethylene (PE) Pressure Pipe and Fittings, 4 in. (100 mm)
Through 63 in. (1,575 mm), for Water Distribution
AWWA C907-91 - Polyvinyl Chloride (PVC) Pressure Fittings for Water—4 in.
Through 8 in. (100 mm Through 200 mm)
AWWA C908-01 - PVC Self-Tapping Saddle Tees for Use on PVC Pipe
AWWA C909-02 - Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4
in. Through 12 in. (100 mm Through 300 mm), for Water Distribution
AWWA C950-01 - Fiberglass Pressure Pipe
AWWA D100-96 - Welded Steel Tanks for Water Storage
AWWA D102-97 - Coating Steel Water-Storage Tanks
AWWA D103-97 - Factory-Coated Bolted Steel Tanks for Water Storage
AWWA D104-01 - Automatically Controlled, Impressed-Current Cathodic Protection
for the Interior of Steel Water Tanks
AWWA D110-95 - Wire- and Strand-Wound, Circular, Pre-stressed Concrete Water
Tanks (Includes addendum D110a-96)
AWWA D115-95 - Circular Pre-stressed Concrete Water Tanks With Circumferential
Tendons
AWWA D120-84 (R89) - Thermosetting Fiberglass-Reinforced Plastic Tanks
AWWA D130-96 - Flexible-Membrane-Lining and Floating-Cover Materials for Potable
Water Storage
AWWA F101-02 - Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs
and Launders (Includes addendum F101a-97)
AWWA F102-02 - Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates,
Scum Baffles, and Mounting Brackets (Includes addendum F102a-97)
